.56-56 Spencer

This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: ".56-56 Spencer" – news · newspapers · books · scholar · JSTOR (January 2013) (Learn how and when to remove this message)

.56-56 Spencer
Type	Rifle
Place of origin	United States
Production history
Designer	Christopher Spencer
Specifications
Case type	Rimmed, straight
Bullet diameter	.550 in (14.0 mm)
Neck diameter	.560 in (14.2 mm)
Shoulder diameter	.560 in (14.2 mm)
Base diameter	.560 in (14.2 mm)
Rim diameter	.645 in (16.4 mm)
Case length	.875 in (22.2 mm)
Overall length	1.545 in (39.2 mm)
Primer type	Rimfire
Maximum pressure (CIP)	11,600 psi (80 MPa)
Ballistic performance
Bullet mass/type Velocity Energy 350 gr (23 g) 1,200 ft/s (370 m/s) 1,125 ft⋅lbf (1,525 J)
Source(s): Barnes & Amber[1]

The .56-56 Spencer (14x22mmRF) was an American black powder rifle cartridge. It was the first self-contained metallic cartridge for a repeating rifle.^[i]

Designed for the Spencer repeating rifle and carbine, patented 6 March 1860, it was employed by cavalry during the American Civil War, first appearing at Sharpsburg in rifle form. No Spencer carbines were on issue at the Battle of Gettysburg, though two units under Custer had the rifles. The .56-56 was loaded with a slug of 350–360 gr (22.7–23.3 g) over 42–45 gr (2.7–2.9 g) of black powder. It was loaded by a variety of companies, and was also used in the Ballard and Joslyn Model 1861 non-repeating breechloading rifles and carbines. It is a short-ranged cartridge, ineffective on anything larger than deer. Commercially loaded ammunition continued to be available into the 1920s and 1930s.

Cite error: There are <ref group=lower-roman> tags or {{efn-lr}} templates on this page, but the references will not show without a {{reflist|group=lower-roman}} template or {{notelist-lr}} template (see the help page).