Templat ini digunakan pada sekitar 16.000 halaman dan perubahannya kemungkinan memicu perubahan massal pada semua halaman yang menggunakannya. Uji cobalah di subhalaman /bak pasir atau /kasus uji Templat:Infobox airport, atau subhalaman pengguna Anda. Pertimbangkan untuk mendiskusikan perubahan di halaman pembicaraan sebelum mengimplementasikannya.
Preview message: Transclusion count updated automatically (see documentation).
Templat kosong berikut mencakup semua nama parameter yang tersedia, kecuali untuk nama berulang yang digunakan untuk landasan pacu dan statistik. Semua parameter kecuali nama adalah opsional; namun, "IATA: none - ICAO: none", bersama dengan judul "Ringkasan" akan selalu muncul. Setiap parameter yang tidak digunakan harus dihilangkan, tetapi juga dapat dibiarkan kosong jika diinginkan. Penggunaan ikon bendera dengan kotak info ini tidak disarankan.
These parameters specify an airport photograph or logo which is displayed below the title. A second image can also be displayed below the first image by using the parameter names ending with a "2".
The image width in pixels, i.e., 175 (defaults to 220 if not specified).
This should only be used for smaller images which would appear distorted when expanded to a width of 220px.
caption / caption2
Text displayed beneath the image. If left blank or omitted, a caption will not be displayed.
This should only be used for photographs that require an explanation; it should be omitted for airport logos and may be omitted for aerial photographs.
These parameters specify airport details for the "Summary" section displayed below the airport codes.
type
Airport type should be one of the following: Public, Private, Military or Military/Public. Do not use Commercial, General or Civil.
owner-oper
If the airport is owned and operated by the same entity, use this in place of owner and operator.
owner
Name of the airport owner.
operator
Name of the airport operator, if not the owner.
city-served
If the airport is associated with a major city but actually located in a smaller town, list the major city here and the smaller town under location. This is not automatically linked, in order to allow multiple links if needed.
Name of the town or city where the airport is located. Do not put the airport's street address in this field. This is not automatically linked, in order to allow multiple links if needed.
The date when the airport originally opened for commercial service.
Example: {{start date|1989|09|22}}
Result: September 22, 1989
closed
The date when the airport closed, either temporarily or permanently, along with reason for closing (for presently closed airports only). Use {{end date}}.
passenger_services_ceased
The date when passenger services to the airport ceased due to conversion of the airport for another use, along with the new use for the airport. Only for airports that previously had passenger services. Use {{end date}}.
hub
If the airport serves as a hub, list the airlines here. This is not automatically linked, in order to allow multiple links if needed. Use {{plainlist}} if the list is long.
These optional parameters provide additional information for military airports. The parameter names are based on those used in Template:Infobox military structure. This allows the display of information from that template, without the need to include an additional infobox. See example 4 below.
built
The date when the structure was built, usually given in years.
used
The period during which the structure was in active military use, usually given in years.
commander
The current commanding officer, for structures currently in military use.
occupants
Any notable military units which occupy the structure.
This template allows for the insertion of geographic coordinates in two different ways: you can either provide a complete {{Coord}} template in the coordinates parameter, or you can provide the individual coordinate components (degrees, minutes, seconds, etc.) in the separate parameters described below. The latter method also allows you to insert a pushpin map with an automatically-placed airport icon and label (see below).
If you use both methods, then the coordinates parameter will be used in the infobox.
coordinates
Latitude and Longitude of airport, specified using the {{Coord}} template. When entering the coordinates always ensure that the resultant map or image shows the airport. It is very easy to confuse "N" for "S" or "E" for "W". If used as shown below, this will also cause the airport to appear in Google Earth's Geographic Web Layer.
This template provides two ways to include a map: as a simple image, or using {{Location map}} and the coordinate parameters described above to automatically place a pushpin mark and label on a map.
Am image map can be displayed by providing a value for image_map. The remaining image_ parameters are optional.
image_map
The name of an image to use as a map, such as Airport_map.png (do not include the File: or Image: prefix).
image_mapsize
(optional) The width to display the image map, in pixels. Just the number, no "px". If omitted or left empty, defaults to 220.
image_map_alt
(optional)Alt text for the image map. If left blank or omitted, this defaults to same text used in image_map_caption (or Location of {{{name}}} if no caption.
image_map_caption
(optional) Caption to display below the image map. If left blank or omitted, a caption will not be displayed.
A location map can be displayed by providing values for coordinates, and pushpin_map. The remaining pushpin_ parameters are optional.
pushpin_map
The name of a location map as per Template:Location map (e.g. Indonesia or Russia). The |coordinates= parameter values position a pushpin mark and label on the map automatically.
pushpin_mapsize
(optional) The width to display the pushpin map, in pixels. Just the number, without "px". If omitted or left empty, defaults to 220.
(optional) Name of an alternative map image, which must have the same edge coordinates as the location map template specified via pushpin_map (see example 5). Do not include the File: or Image: prefix. For additional information, see Template:Location map#AlternativeMap parameter.
pushpin_label
(optional) The text of the label to place next to the pushpin mark (see example 1). The default is the value of the name parameter.
pushpin_label_position
(optional) The position of the label on the pushpin map relative to the pushpin mark (see example 5). Valid values are left, right, top and bottom. This defaults to either left or right, depending on the coordinates of the marker and its position relative to the right border of the map image.
(optional) The size of the mark in pixels (see example 5). The default is 10. Do not include px, for example: pushpin_marksize = 8, not pushpin_marksize = 8px.
These parameters control how certain fields within the infobox are displayed.
metric-elev
Set to any value to display elevation in metric units (metres) before imperial/US units (feet); leave blank to display imperial/US units first. This can be seen in example 1.
metric-rwy
Set to any value to display runway length in metric units (metres) before imperial/US units (feet); leave blank to display imperial/US units first. Examples 1 and 2 below show the runway length with metres first; example 3 and 4 show it with feet before metres.
These parameters specify details for each runway in the "Runways" section displayed below the summary. This can also be used to specify water landing areas for seaplanes (see Fairbanks International Airport). Parameters start with r1- for the first runway, r2- for the second runway, up to r8- for the eighth runway (if more are needed, leave a message on the talk page). Each airport should have at least one runway.
rn-number (r1-number, r2-number, ...)
The designation of the runway, normally two numbers like this → 02/20, 1st number is 18 lower than the 2nd. Where there are parallel runways an additional letter is added to each number, for example "L" for left, "R" for right and "C" for center. In certain cases a runway will only have one number when it can only be used in one direction. For airports in the United States the leading zero is not used and the designation should read 2/20.
These parameters specify details for each helipad in the "Helipads" section displayed below the runways. Parameters start with h1- for the first helipad, h2- for the second helipad, up to h12- for the twelfth helipad (if more are needed, leave a message on the talk page). This section is optional and only appears if the h1- parameters are specified. See example 1 and example 3 below.
hn-number(h1-number, h2-number, ...)
The designation of the helipad. In the United States this is usually the letter "H" followed by a number, i.e. "H1", "H2", etc.
hn-length-f (h1-length-f, h2-length-f, ...)
Helipad length in feet.
hn-length-m (h1-length-m, h2-length-m, ...)
Helipad length in metres.
hn-surface (h1-surface, h2-surface, ...)
Helipad surface type, such as: Concrete, Asphalt, etc. Avoid the generic type "Paved" if possible.
These parameters specify details for an optional "Statistics" section displayed below the runways and helipads. Parameters start with stat1- for the first statistic, stat2- for the second statistic, etc. This section only appears if the stat1- parameters are specified. See example 1 and example 3 below.
statn-header (stat1-header, stat2-header, ...)
A brief description of each statistic, such as Passengers or Aircraft operations.
statn-data (stat1-data, stat2-data, ...)
The data associated with the corresponding header.
stat-year
The calendar year for the statistics. This is displayed in parentheses after the word "Statistics" in the section header.
This infobox shows the use of an image and linked text over the blue background in title area. It also makes use of some of the fields used for military airports.
{{Infobox airport
| name = Wright–Patterson Air Force Base
| ensign = [[File:Air Force Materiel Command.png|100px]]
| nativename = {{smaller|[[Air Force Materiel Command|{{black|Air Force Materiel Command}}]]}}
| image = National Museum of the United States Air Force.jpg
| image-width = 250
| caption = [[National Museum of the United States Air Force]]
| IATA = FFO
| ICAO = KFFO
| FAA = FFO
| type = Military: [[Air Force Base]]
| operator = [[United States Air Force]]
| location = [[Dayton, Ohio]]
| built = <!--1948-->
| used = 1948 – present
| commander = <div>
* Gen. Bruce Carlson – [[Air Force Materiel Command]]
* Brig. Gen. Bruce E. Davis – [[445th Airlift Wing]]
* Col. Colleen M. Ryan – [[88th Air Base Wing]] and Installation Commander
</div>
| occupants =
| elevation-f = 823
| elevation-m = 251
| website = {{URL|http://www.wpafb.af.mil/}}
| coordinates = {{coord|39|49|34|N|084|02|54|W|display=inline<!--- set here to prevent coordinates from appearing in the title of the template page --->}}
| pushpin_map = USA Ohio
| pushpin_map_caption = Location within Ohio
| pushpin_label = Wright–Patterson AFB
| r1-number = 5L/23R
| r1-length-f = 12,601
| r1-length-m = 3,841
| r1-surface = [[Porous European Mix|PEM]]
| r2-number = 5R/23L
| r2-length-f = 7,000
| r2-length-m = 2,134
| r2-surface = [[Asphalt]]
| footnotes = Sources: FAA<ref>{{FAA-airport|ID=FFO|use=PR|own=MA|site=17827.*A}}</ref>, official website<ref>[http://www.wpafb.af.mil/ Wright-Patterson Air Force Base] (official site)</ref>.
}}
Templat ini lebih menyukai format parameter dalam blok.
Parameter
Keterangan
Jenis
Status
Name
name
The name of the airport in English
Kata
opsional
Nativename
nativename
Airport name in a native language using Western characters (French, German, Spanish, etc.)
Kata
opsional
Nativename-a
nativename-a
Airport name in a native language with non-Western characters (Chinese, Japanese, Korean, Arabic, etc.), such as ????????.
Kata
opsional
Nativename-r
nativename-r
Use in conjunction with above for Romanized name of the airport. In such cases the Romanized name should be in italics.
Kata
opsional
Ensign
ensign
A small ensign using image syntax such as [[File:Example.png|100px]].
Isi
opsional
Image
image
The name of image file, such as Airport.png or Logo.gif (do not include the File: or Image: prefix).
Nama halaman
opsional
Image-Width
image-width
The image width in pixels, i.e., 175 (defaults to 220 if not specified).
Angka
opsional
Image Alternative
image_alt
Alternative text for the images.
Kata
opsional
Caption
caption
Text displayed beneath the image. If left blank or omitted, a caption will not be displayed. This should only be used for photographs that require an explanation; it should be omitted for airport logos and may be omitted for aerial photographs.
Kata
opsional
Image2
image2
The name of image file, such as Airport.png or Logo.gif (do not include the File: or Image: prefix).
Nama halaman
opsional
Image2-Width
image2-width
The image width in pixels, i.e., 175 (defaults to 220 if not specified). This should only be used for smaller images which would appear distorted when expanded to a width of 220px.
Angka
opsional
Image2 Alternative
image2_alt
Alternative text for the images.
Kata
opsional
Caption2
caption2
Text displayed beneath the image. If left blank or omitted, a caption will not be displayed. This should only be used for photographs that require an explanation; it should be omitted for airport logos and may be omitted for aerial photographs.
Kata
opsional
IATA
IATA
The airport's three character IATA location identifier. If omitted or left blank it will display as IATA: none.
Kata
opsional
ICAO
ICAO
The airport's four character ICAO location identifier. If omitted or left blank it will display as ICAO: none.
Kata
opsional
FAA
FAA
The three or four character FAA location identifier for airports in the United States. If omitted or left blank, nothing is displayed.
Kata
opsional
TC
TC
The three or four character Transport Canada location identifier for airports in Canada. If omitted or left blank, nothing is displayed.
Kata
opsional
LID
LID
A location identifier for airports outside the US or Canada, if other than ICAO or IATA codes. If omitted or left blank, nothing is displayed.
Kata
opsional
GPS
GPS
A Global Positioning System code for the airport, if other than ICAO or IATA codes. If omitted or left blank, nothing is displayed.
Kata
opsional
WMO
WMO
The World Meteorological Organization five digit code for the weather station at the airport. If omitted or left blank, nothing is displayed.
Kata
opsional
Type
type
Airport type should be one of the following: Public, Private, Military or Military/Public. Do not use Commercial, General or Civil.
Kata
opsional
Owner-Operator
owner-oper
If the airport is owned and operated by the same entity, use this in place of owner and operator.
Kata
opsional
Owner
owner
Name of the airport owner.
Kata
opsional
Operator
operator
Name of the airport operator, if not the owner.
Kata
opsional
city-served
city-served
If the airport is associated with a major city but actually located in a smaller town, list the major city here and the smaller town under location. This is not automatically linked, in order to allow multiple links if needed.
Kata
opsional
Location
location
Name of the town or city where the airport is located. Do not put the airport's street address in this field. This is not automatically linked, in order to allow multiple links if needed.
Kata
opsional
Opened
opened
The date when the airport originally opened for commercial service.
Kata
opsional
Closed
closed
The date when the airport closed, either temporarily or permanently, along with reason for closing (for presently closed airports only). Use {{end date}}.
Kata
opsional
Passenger Services Ceased
passenger_services_ceased
The date when passenger services to the airport ceased due to conversion of the airport for another use, along with the new use for the airport. Only for airports that previously had passenger services. Use {{end date}}.
Kata
opsional
Hub
hub
If the airport serves as an hub, list the airlines here. This is not automatically linked, in order to allow multiple links if needed. Use {{plainlist}} if the list is long.
Kata
opsional
Focus City
focus_city
If the airport serves as a focus city
Kata
opsional
Built
built
The date when the structure was built, usually given in years.
Baris
opsional
Used
used
The period during which the structure was in active military use, usually given in years.
Kata
opsional
Commander
commander
The current commanding officer, for structures currently in military use.
Kata
opsional
Occupants
occupants
Any notable military units which occupy the structure.
Kata
opsional
Timezone
timezone
Will give the time zone that the airport is in, can be linked. A list can be found at List of time zones by country. Timezone is optional, but if it is used, then utc must be used as well, can be linked. A list can be found at List of UTC time offsets.
Angka
opsional
UTC
utc
UTC time of the airport
Angka
opsional
Summer
summer
If the time zone observes daylight saving time this will give the zone that the airport is in, can be linked. A list can be found at List of time zones by country.
Kata
opsional
UTCS
utcs
Summer is optional, but if it is used, then utcs must be used as well, can be linked. A list can be found at List of UTC time offsets.
Kata
opsional
Elevation In Feet
elevation-f
Height above mean sea level, in feet.
Angka
opsional
Elevation In Metres
elevation-m
Height above mean sea level, in metres.
Angka
opsional
Metric-elevation
metric-elev
Set to any value to display elevation in metric units (metres) before imperial/US units (feet); leave blank to display imperial/US units first.
Angka
opsional
Coordinates
coordinates
Latitude and Longitude of airport, specified using the {{Coord}} template
Angka
opsional
Website
website
External link to the airport's official website
Kata
opsional
Image Map
image_map
The name of an image to use as a map, such as Airport_map.png (do not include the File: or Image: prefix).
Nama halaman
opsional
Image Mapsize
image_mapsize
The width to display the image map, in pixels. Just the number, no "px". If omitted or left empty, defaults to 220.
Angka
opsional
Image Map Alternative
image_map_alt
Alt text for the image map. If left blank or omitted, this defaults to same text used in image_map_caption (or Location of {{{name}}} if no caption.
Kata
opsional
Image Map Caption
image_map_caption
Caption to display below the image map. If left blank or omitted, a caption will not be displayed.
Kata
opsional
Pushpin Map
pushpin_map
The name of a location map as per Template:Location map (e.g. Indonesia or Russia). The coordinates field position a pushpin mark and label on the map automatically.
Kata
opsional
Pushpin Mapsize
pushpin_mapsize
The width to display the pushpin map, in pixels. Just the number, without "px". If omitted or left empty, defaults to 220.
Angka
opsional
Pushpin Map Alternative
pushpin_map_alt
Alt text for the pushpin map.
Kata
opsional
Pushpin Map Caption
pushpin_map_caption
Caption to display below the pushpin map. If left blank or omitted, a caption will not be displayed.
Kata
opsional
Pushpin Relief
pushpin_relief
Any non-blank value (yes, 1, etc.) will cause the template to display a relief map image, where available (see example 1). For additional information, see Template:Location map#Relief parameter.
Kata
opsional
Pushpin Image
pushpin_image
Name of an alternative map image, which must have the same edge coordinates as the location map template specified via pushpin_map
Nama halaman
opsional
Pushpin Label
pushpin_label
The text of the label to place next to the pushpin mark . The default is the value of the name parameter.
Kata
opsional
Pushpin Label Position
pushpin_label_position
The position of the label on the pushpin map relative to the pushpin mark (see example 5). Valid values are left, right, top and bottom. This defaults to either left or right, depending on the coordinates of the marker and its position relative to the right border of the map image.
Kata
opsional
Pushpin Mark
pushpin_mark
The name of an image to display as the pushpin mark. The default is File:Airplane silhouette.svg ( Airplane silhouette.svg ).
Kata
opsional
Pushpin Marksize
pushpin_marksize
The size of the mark in pixels
Angka
opsional
r1-Number
r1-number
The designation of the runway, normally two numbers like this ? 02/20, 1st number is 18 lower than the 2nd. Where there are parallel runways an additional letter is added to each number, for example "L" for left, "R" for right and "C" for center. In certain cases a runway will only have one number when it can only be used in one direction. For airports in the United States the leading zero is not used and the designation should read 2/20.
Angka
opsional
r1-Length-In Feet
r1-length-f
Runway length in feet.
Angka
opsional
r1-Length-In Metres
r1-length-m
Runway length in metres.
Angka
opsional
r1-Surface
r1-surface
Runway surface type, such as: Concrete, Asphalt, Gravel, Grass (or Turf), Dirt, Water, etc. Avoid the generic type "Paved" if possible.
Kata
opsional
Metric-runway
metric-rwy
Set to any value to display runway length in metric units (metres) before imperial/US units (feet); leave blank to display imperial/US units first
Kata
opsional
h1-Number
h1-number
The designation of the helipad. In the United States this is usually the letter "H" followed by a number, i.e. "H1", "H2", etc.
Angka
opsional
h1-Length-In Feet
h1-length-f
Helipad length in feet.
Angka
opsional
h1-Length-Metre
h1-length-m
Helipad length in metres.
Angka
opsional
h1-Surface
h1-surface
Helipad surface type, such as: Concrete, Asphalt, etc. Avoid the generic type "Paved" if possible.
Kata
opsional
Stat1-Header
stat1-header
A brief description of each statistic, such as Passengers or Aircraft operations.
Kata
opsional
Stat1-Data
stat1-data
The data associated with the corresponding header.
Kata
opsional
Stat-Year
stat-year
The calendar year for the statistics. This is displayed in parentheses after the word "Statistics" in the section header.
Baris
opsional
Footnotes
footnotes
The most common use for this field is to give sources or references for the data displayed in the infobox
The HTML mark up produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue article across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.